Paradyne T1 T1 Access Mux 926x - Manual (Page 29)

2-1 9161-A2-GH30-30 April 1998
Management and Control
2
Overview
This chapter provides the steps needed to provide management connectivity to
the T1 access unit. You need to select and configure:
H
A method of local management connectivity for T1 access units.
H
A method for end-to-end management connectivity across the network.
See Appendix B, IP Addressing for an IP addressing scheme that fits the local
and end-to-end management connectivity methods.
Configuring Local Management Control
When managing the T1 access unit locally, you can establish a management link
in one of two ways. You can:
H
Create a management link directly connected through the COM port.
H Connect through an external device (modem, LAN adapter, etc.) to the COM
port.