Paradyne T1 T1 Access Mux 926x User Manual
Page 323

Index
9161-A2-GH30-30
April 1998
P
Parity, 5-54
Matching Error, 9-18
Performance Statistics
pin assignments
3 Amph. plugs-to-1 Amph. plug cable, E-17
3 Amph. plugs-to-4 Amph. plugs cable, E-19
to PC or terminal/printer cable, E-2
COM port-to-terminal/printer cable, E-2
E&M voice APM connector, E-13
EIA530A-to-RS449 DTE adapter cable, E-10
EIA 530 A-to-V.35 DTE adapter cable, E-8
EIA 530A-to-X.21 DTE adapter cable, E-11
EIA-232E port, connector/interface, E-6
EIA-530A port 1 or 2 interface, E-6
FXO/FXS voice APM connector, E-12
FXS voice APM connector, E-12
LAN adapter, E-4
LAN adapter to COM port, cable, E-4
T1 mass termination cable, E-26
T1 Network Interface Connector, E-5
Please Wait, 7-17
port
communication, setting up, 5-52
OCU-DP, configure, 5-32
Port (DTE) Initiated Loopbacks, 5-20
Port Rate, OCU-DP, 5-33
Port Status
Port Type, 5-17, 5-53
power supply, 1-10
Primary Clock, Failure Alarm, 5-51
R
Remote FT1 Data Channel Loopback, 9-31
resetting, T1 access unit, 8-13
resetting the access unit, COM port, 4-8, 8-14
restoring access to the user interface, 8-13
Return (Enter) key, 4-5
right arrow key, 4-5
Ring-Back Tone, FXS, 5-31
routers, routing to remote access units, B-6
Routing
using different subnets, B-5
Routing Information Protocol (RIP), 5-11, 5-21, 5-56
Rx Gain (dB)