Panasonic CX-D3000U - Manual (Page 22)

E
N
G
L
I
S
H
18
CX-D3000U
27 27 27
Cause/Step Trouble
Troubleshooting Tips
❐ Common
Car’s engine switch is not on.
➡ Turn your car’s ignition switch to ACC or ON.
No power.
Cables are not correctly connected.
➡ Connect cables correctly.
➡ Connect the battery cable to the terminal that is always active.
➡
Connect the accessory cable to your car’s ACC source.
➡ Connect the grounding wire to a metal part of the car.
Fuse is burnt out.
➡ Call the store where you purchased the unit, or your nearest Servicenter
(see the attached sheet) and ask for fuse replacement.
Disc is upside down.
➡ Place disc in the correct direction with the label side up.
≥ Disc is dirty.
≥ Disc has scratches.
➡ Clean the disc, referring to the section on “Notes on Disc”. (page 34)
➡ The player can only play the following types of discs:
DVD video, Video CD, CD and CD-DA data recorded CD-R and
CD-RW, and MP3 data recorded CD media (CD-ROM, CD-R, CD-RW).
➡ The player may not successfully play back a CD-R/RW that is made
in combination of writing software, a CD recorder (CD-R/RW drive)
and a disc which are incompatible one another. Refer to instruc-
tions for the concerned devices for details.
The disc is inside but there
is no sound.
Cause/Step Trouble
❐ DVD/Video CD/CD
You are trying to play a dts CD or DVD.
➡ The player cannot play audio on dts CDs or DVDs unless a digital surround
processor is used (page 42–43).
Cables are not correctly connected.
➡ Connect cables correctly.
Condensation (dew).
➡ Wait for a while before use.
No sound.