Panasonic CX-D3000U - Manual (Page 35)

No.
6
4
Electrical Connections
E
N
G
L
I
S
H
31
CX-D3000U
40
Item
40
BATTERY 5A
PARKING BRAKE
VIDEO-CONT
ACC
CX-D3000U (rear)
DIGITAL OUT Not used.
L (White)
R (Red)
Video (Yellow)
(Yellow)
Not used.
ACC power lead
To ACC power, +12 V DC.
Battery lead
To the car battery, continuous +12 V DC.
Ground lead
To a clean, bare metallic part of the car chassis. (Black)
(Red)
(Green/yellow stripe)
(Blue/yellow stripe)
Side brake (parking brake) connection lead
(page 44)
Connect the battery power cord to a connector that
is always supplied with power from the car battery.
4 Power connector
Remote control
signal receiver
8 Double-sided tape
POW ER
Attaching the remote
control signal receiver
VIDEO OUT
AUDIO OUT
REMOTE IN
6 Cord clamp
When connecting or disconnecting the cord, be absolutely
sure to take hold of the molded part of the plug (and not
the cord itself) and proceed. When connecting the cord,
be sure to push it all the way in. ≥
≥ Do not accidentally connect a radio antenna, etc.
Be sure to connect this as a safety measure.
≥
≥
1
1
Q’ty
Power connector
Cord clamp
7
8
1
1
RCA cord
Double-sided tape
❐ Wiring diagram
Accessories used for wiring
Examples of system combination:
≥ In-dash monitor/receiver
(CQ-VA707W, option)
≥ Rear seat monitor
(CY-VM5800U, option)