Panasonic CX-D3000U - Manual (Page 32)

No.
❐ Installation hardware
❐ Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please refer to the “WARNING” statement above.)
≥ Identify and label the car wires.
≥ Connect the car wires to the wires of the power
connector.
≥ Check the operation of the product.
If you encounter problems, please consult your
nearest professional installer.
6
Diagram Item
E
N
G
L
I
S
H
28
Installation Guide
CX-D3000U
37 37
Before you begin installation, look for the items
which are packed with your product.
≥ Warranty Card…Fill this out promptly.
≥ Panasonic Servicenter List for Service Directory
…Keep for future reference in case the product
needs servicing.
❐ Required tools
You’ll need a screwdriver, and the following:
Q’ty
4
WARNING
The installation information is designed for experienced installers and is not
intended for non-technical individuals. It does not contain warnings or cautions of
the potential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.
1
2
3
4
5
Tapping screws
(5 mm
·k16 mm)
Binding-Head Screws
(M5
k6 mm)
4
2
1
1
L-shaped brackets
Power connector
(5 m)
Clamp connector
1
1
1
Caution:
≥ This product operates with a 12 V DC nega-
tive ground auto battery system only. Do not
attempt to use it in any other system. Doing
so could cause serious damage.
12 V DC
test bulb
Electrical
tape
Side-cut
pliers
Cord clamp
RCA cord
(3 m)
7
Double-sided tape 8