Troubleshooting, Continued), Dvd/video cd/cd (continued) – Panasonic CX-D3000U User Manual

Page 23

Advertising
background image

Troubleshooting

(continued)

E

N

G

L

I

S

H

19

CX-D3000U

28

28

28

Cause/Step

Trouble

❐ DVD/Video CD/CD (continued)

Video CD menu playback

does not work.

The picture does not
appear on the monitor.

The buttons do not work.

Some operations are not permitted with certain discs.

➡

Refer to the guide provided with your disc.

Two REMOTE IN connectors are connected.

➡

Do not connect the remote control signal receiver when remote
control signals can be received by the display unit.

Cables are not correctly connected.

➡

Connect cables correctly.

➡

Check the settings for the monitor itself.

➡

Stop the car and apply the parking brake.

The picture becomes dis-
torted while fast forward-
ing or reversing.

➡

Video CD menu playback works only when playing a video CD that
has the playback control feature.

➡

A certain amount of distortion is normal.

The first track of a mix mode disc was reproduced. (Mix mode is a
format in which data except music is recorded on the first track and
music data is recorded on other than the first track in a session.)

➡

This player does not support mix mode discs. Playback the disc
containing only music data or only MP3 data.

Time is counted but no
sound comes out.

CD-text is not displayed
normally.

≥

Disc is dirty.

≥

Disc has scratches.

➡

Clean the disc, referring to the section on “Notes on Disc”. (page 34)

≥

Disc is defective.

≥

Mechanical trouble.

➡

Open the cover and press [

<] (eject). If the disc still does not

eject, press the reset switch (page 31).

The disc is not ejected.

Sound skips, bad sound
quality (e.g. caused by
noise).

≥

Disc is dirty.

≥

Disc has scratches.

➡

Clean the disc, referring to the section on “Notes on Disc”. (page 34)

➡

The player may not successfully play back a CD-R/RW that is made
in combination of writing software, a CD recorder (CD-R/RW drive)
and a disc which are incompatible one another. Refer to instructions
for the concerned devices for details.

Sound skips due to vibra-
tion.

Mounting angle is over 30°.

➡

Adjust mounting angle to less than 30°.

Instable mounting.

➡

Mount the player securely with the mounting parts, referring to the
section on installation.

Advertising