Panasonic P2HD AJ-HRW10G - Manual (Page 19)

19
Setting the RAID function (continued)
Deleting RAID drives (Delete RAID)
When switching between RAID1 and JBOD or
otherwise changing the RAID level, delete the logical
drive which is currently set.
When the RAID level is re-set, the data on the HDD
will be deleted so take care before proceeding.
A
B
A HDD-related information
● Select
The button will flash green when selected.
● Assigned Name
Display the RAID board connection location and
RAID level.
● Array ID
Displays RAID control number.
● Capacity
Displays RAID disk capacity.
● Status
Displays operating conditions.
B CLOSE button
Return to the main screen.
The HDD is indicated as a theoretical device. Select
the device you want to delete and press OK button, a
confirming message will display.
Press OK button and the selected theoretical device
will be deleted from the theoretical device list.
After the finished message is displayed, Press the OK button.
Press NEXT button after setting, the confirming screen
will display. Please press OK button.
(In the RAID1 mode)
(In the JBOD mode)
When HDDs of different capacities have been set as
RAID1, the smaller size of the two installed HDDs is
displayed in Logical Drive Size.
Please press OK button in the further confirming
screen.
When the OK button on the reconfirmation screen is
pressed, all the data on the HDD is deleted. Make
sure that you do not need the data before pressing this
button.
Press the OK button when a message is displayed
after RAID initialization. The unit can now be used as a
RAID drive.