Panasonic P2HD AJ-HRW10G - Manual (Page 37)

37
Checking the state of all slots
Press INFO button in the main screen, the INFO screen will display.
You can check the volume of P2 cards in any slot or
the HDDs. The default volume name is DVCPRO HD.
If you want to check the volume in other format, please
press FORMAT select button on the bottom of the
screen.
A Slots
Write-protected P2 cards are identified by a ( )
mark next to the slot number.
B Format select button
This indicates the used memory and total memory
(USED/ALL) in minutes (MIN) for the corresponding
format.
One of the following 5 buttons is displayed.
• [DVCPRO]
• [DVCPRO 50]
• [DVCPRO HD]
• [AVC-I50]
• [AVC-I100]
C CLOSE button
Close the INFO screen and go back to the main
screen.
A
B C