Panasonic BB-HGW700A - Manual (Page 127)

127 [For assistance, please call: 1-800-272-7033]
Operating Instructions
Ot
he
r
Inf
o
rm
a
tion
4.4.2 Re-obtaining an IPv6 Global Address
4.4.3 Setting a Static IPv6 Global Address.
1.
Select [Start] [All Programs]
[Accessories] [Command Prompt] and
click.
• The command prompt is started.
2.
Enter "netsh" and press [Enter].
3.
On the netsh command line, enter "interface
ipv6", and press [Enter].
4.
Enter "renew", and re-obtain an IPv6 global
address.
5.
Enter "exit", press [Enter], and end the netsh
command.
1.
Perform steps 1, 2, and 3 in Re-obtaining an
IPv6 global address above.
2.
Enter "show interface", and press [Enter].
• Take a note of the Idx number of the Local
Area Connection.
3.
Next, enter "set address interface=* the IPv6
global address type=unicast", and press
[Enter].
• After "interface=", enter the Idx number
noted in step 2.
4.
Enter "exit", press [Enter], and end the netsh
command.