Panasonic BB-HGW700A - Manual (Page 44)

Operating Instructions
44
Additional Camera Registration (Registering Additional Cameras
Manually)
Follow the steps below to register additional cameras.
1.
Click Add under the Operation heading.
2.
Enter or Select Camera Name, Camera
network location, Access Control, Port, IP
Address, Host Name, IPv6 Address, Host
Name, and Pre-shared Key if you are using
IPsec, and click [Add].
3.
When setup is complete, click [Save].
• The entered information is saved.
4.
When [Restart] is displayed on the setup page,
click it.
5. Follow the instructions on page 47 to add the
new camera to the camera portal.