Panasonic KX-FT31BX - Manual (Page 51)

51
F
a
x
/C
o
p
y
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select the desired setting.
● If this feature is not required, select “OFF”.
5 Press .
● The display will show the pre-selected code.
6 Enter the new code number.
● This code can be from 2 to 4 digits in length
using 0 - 9 and
.
7 Press .
8 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
CODE= 9
START/COPY/SET
MODE=ON ▼ ▲
START/COPY/SET
FAX ACTIVATION
1 4
1.SYSTEM SET UP
MENU
Note:
● If you subscribe to some special telephone company
services, all or part of the fax activation code must be
different from the service access code.
● The fax activation code should not be set to “0000”.
1 2 3
4 5 6
7 8 9
0
Dial keypad MENU
START/COPY/SET
Receiving Faxes
Changing the fax activation code
The fax activation code is used in the following cases;
— when receiving faxes using an extension telephone (see page 50).
— when receiving a voice message and fax document in one call (see page 47).
Important:
● This code should be different from the remote activation ID (see page 47).