Printronix ANSI Printer - Manual (Page 35)

Graphic Rendition
35
Graphic Rendition
ASCII Code ESC [p1;p2...;pn m
Hex Code 1B 5B p1 3B p2 ... 3B pn 6D
Dec Code 27 91 p1 59 p2 ... 59 pn 109
Expression CHR$(27);“[p1;p2...;pn m”;
Purpose Sets the character type and enhancements, such as boldface,
underscore, expanded, or proportional. One font designator plus
any number of enhancements can be entered in the escape
sequence using the parameter values in Table 4.
Discussion If the requested font is not installed, the Data Processing font will
be activated. When a new font is selected, the horizontal
spacing is initially set to the default spacing (10 cpi).
This sequence is also valid in graphics.
Table 4. Character Types and Enhancements
Parameter Enhancement
0 Normal Mode
1 Bold/shadow
4 Underline
5 2X horizontal expansion (Note: This mode cancels any
horizontal or vertical expansion previously set. Can be
cleared by either a parameter value of 0 in this sequence
or by ESC[p1;p2 SP B.)
6 Proportional printing (Note: This mode is valid for all cpi
values, expansion values, print modes, and fonts except
high speed draft and character graphics.)
10 Default font (Data Processing)
11 Gothic draft font
12 Character graphics/mathematical symbol font
13 Gothic NLQ font
14 Courier NLQ font
15 High speed draft font
16 OCR-A
17 OCR-B
18 Italic NLQ font
19 Correspondence