Printronix ANSI Printer - Manual (Page 38)

38
Chapter 2 Configuring The ANSI Emulation
Private Mode, Disable
ASCII Code ESC [>5l (lowercase “L”)
Hex Code 1B 5B 3E 35 6C
Dec Code 27 91 62 53 108
Expression CHR$(27); “[>5l”;
Purpose Disables private mode.
Discussion Selects character set 1 of the selected 8 bit international
character set. With non-ISO character sets, hex codes 20-7F
and A0-FF are printable. Hex codes 80-9F are duplicates of 00-
1F. For ISO character sets hex codes 80-9F are treated as Nulls.
Private Mode, Enable
ASCII Code ESC [>5h
Hex Code 1B 5B 3E 35 68
Dec Code 27 91 62 53 104
Expression CHR$(27): “[>5h”;
Purpose Enables private mode.
Discussion Selects character set 2 of the selected 8 bit international
character set. Allows printing of hex codes 15, 20-7E and 80-FF.
Proportional Print Mode
ASCII Code ESC [6 m
Hex Code 1B 5B 36 6D
Dec Code 27 91 54 109
Expression CHR$(27);“[6m”;
Purpose Sets proportional printing where each character has its own
width.
Discussion All fonts and modes allow proportional printing. The
proportionalized character graphics font, however, is the same
as the normal character graphics font.