Printronix ANSI Printer - Manual (Page 50)

50
Chapter 2 Bar Codes
NOTE: Parameters p2 through p10 are invalid for POSTNET. Do not change
the default values; otherwise, they will be retained in memory and will
affect the other bar code styles.
NOTE: The dimensions that follow apply to bar codes that are printed at 0
and 180 degrees rotation. If you are printing bar codes that are
rotated 90 or 270 degrees, the dimensions will be compressed by a
6:5 ratio.
p2
Bar code height in 1/12 inch increments. Does not include the human
readable line.
Min.:1 = 1/12 inch
Max.:120 = 10 inch
Default:9 = 9/12 inch (or 3/4 inch)
p3
Printing the human readable line.
0 = Do not print the human readable line
1 = Default. Print the human readable line
p4
Narrow bar width (number times 1/120”).
Range:2 - 126
Default:2 (2/120 inch, or approximately .017 inch)
p5
NOTE: p5, p7, and p8 are not programmable in some bar code styles.
Wide bar width (number times 1/120”).
Range:2 - 254
Default:6 (6/120 inch, or approximately .050 inch)
15 Code 93
16 Code 128
17 Reserved
18 Reserved
50 POSTNET
Table 17. p1 Values (continued)
If p1 = Style