Printronix ANSI Printer - Manual (Page 9)

9
1
Introduction
About This Manual
This manual lists the ANSI
®
commands and explains how to configure the
printer when this emulation is loaded in your printer.
Audience
This book assumes you are an experienced programmer and are familiar with
the ANSI emulation.
Warnings and Special Information
Read and comply with all information highlighted under special headings:
WARNING Conditions that could harm you as well as damage the equipment.
CAUTION Conditions that could damage the printer or related equipment.
IMPORTANT Information vital to proper operation of the printer.
NOTE: Information affecting printer operation.
Related Product Information
The User’s Manual describes the keys on the control panel and provides
quick reference information on daily printer operations such as loading paper
and replacing ribbons. This book also provides configuration instructions and
descriptions and troubleshooting guidelines.
Software Features
The ANSI emulation software provides the following features:
• Graphics and a selection of print densities. You can enable graphics
mode and specify a density mode (dots per inch).
• Print Attributes. Characters can be bold, italic, double high, double wide,
etc.
• Page Formatting. American National Standards Institute (ANSI)
commands allow you to set line spacing, page length, and vertical forms
control.