Panasonic DMC-TZ1 - Manual (Page 30)

Basic
30
VQT0V40
Taking Pictures with
the Zoom
You can make people and subjects appear
closer with the 10
k optical zoom and
landscapes can be recorded in wide angle.
∫ To make subjects appear closer use
(Tele)
Rotate the zoom lever towards
Tele.
• When the setting for picture size is
[ ] (5M).
∫ To make subjects appear further away
use (Wide)
Rotate the zoom lever towards
Wide.
• When the setting for picture size is
[ ] (5M).
• You can use the zoom while recording in
motion picture mode [ ]. In this case,
we recommend setting [CONT.AF] (P76)
to [ON]. (P64)
• The optical zoom is set to Wide (1 k)
when the camera is turned on.
• Depending on the zoom magnification, the
picture may have some distortion.
Distortion will be more visible when using
a wider area of the zoom lens as you
move closer to the subject.
• Depending on the zoom magnification, the
picture may have some colored fringes
around the subject. This is called
chromatic aberration and may be more
visible when recording distant subjects.
• If you use the zoom function after focusing
on the subject, focus on the subject again.
• The indicated zoom magnification is an
approximation.
• The lens barrel (P10) extends or retracts
according to the zoom position. Take care
not to interrupt the motion of the lens
barrel while the zoom lever is rotated.
• When you rotate the zoom lever, you
may hear some sound from the camera
or the camera may be shaken. This is
not a malfunction.
This camera has a 10 k optical zoom.
However, if the picture size is not set to the
highest setting for each aspect ratio [
/
/ ], a maximum of 12.5 k optical
zoom can be achieved with no picture
quality deterioration.
Using the Optical Zoom
SCN 1 SCN 2
W T 10X
3
T W
W T 1X
3
T W
Using the Extended Optical Zoom
(EZ)
SCN 1 SCN 2
VQT0V40ENG.book 30 ページ ２００６年２月２７日 月曜日 午後１時１９分