Panasonic DMC-TZ1 - Manual (Page 90)

Menu Settings
90
VQT0V40
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P80)
You can copy recorded picture data from
the built-in memory to a card or vice versa.
1 Press 3 4 to select the copy
destination and then press
[MENU/SET].
• :
All the picture data in the built-in
memory are copied onto the card at
one time.
(Perform step 3)
• :
One picture at a time is copied from the
card to the built-in memory.
(Perform step 2)
2 Press 2 1 to select the picture
and then press 4.
• When you copy picture data from the
built-in memory to the card, all the
pictures are selected at one time so this
screen does not appear.
3 Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• The message [COPY THIS PICTURE
TO BUILT-IN MEMORY?] appears when
you copy pictures from the card to the
built-in memory.
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
• Do not turn the camera off or do any
other operations before copying is
finished. The data on the built-in
memory or the card may be damaged
or lost.
4 Press [MENU/SET] several times
to close the menu.
• If you copy picture data from the built-in
memory to a card, the screen
automatically returns to the playback
screen when all the pictures are copied.
[COPY]
Copying the picture data
MENU
SET
MENU
SET
PLAY 3 / 3
FORMAT
COPY
SET MENU SELECT
COPY
EXIT
SELECT
SET
MENU
100_0001
1 / 3
COPY
SELECT SET MENU
MENU
SET
COPY PICTURES FROM
BUILT-IN MEMORY TO
MEMORY CARD ?
NO
YES
VQT0V40ENG.book 90 ページ ２００６年２月２７日 月曜日 午後１時１９分