Panasonic KX-T206E - Manual (Page 24)

24
System Programming
1 0 (Record your message)
9 0
[A] [Denied code No.]
TRS Denied Code (CLASS 2, 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 2 and Class 3.
Condition
• The character “ ” can be any number.
Input Format
Explanation
• [A]= Code No.: 0 through 9 1 digit • Denied code number: 7 digits,
Default All codes– Not stored
TRS Denied Code (CLASS 3)
Description
Allows you to specify the numbers which are toll-restricted for TRS Class 3.
Condition
• The character “ ” can be any number.
Input Format
Explanation
• [A]= Code No.: 0 through 9 1 digit • Denied code number: 7 digits,
Default All codes– Not stored
OGM Recording
Description
Used to record an outgoing message for Direct Inward System Access (DISA).
Condition
• The recording time is a maximum of 16 seconds.
• If you perform programming with a PT, the message “RECORDING” will be displayed on
its panel.
• If the DISA/FAX Detect card is not installed, you will hear a reorder tone and the program
is finished.
Message example: “This is AAA company. Please enter 1 for Mr. AA, 2 for Mr. BB .......
6 for Ms. FF. Thank you.”
Input Format
0 8 [A] [Denied code No.]