Setup adjustment, Off timer, Ch colour set – Panasonic TX-47P950A User Manual

Page 23: Child lock, Blue back, Illumination, Flicker reduction, 3d-comb, Picture shift, Colour matrix

Advertising
background image

23

Setup Adjustment

1

Press to display the MAIN MENU, and
then to the SETUP menu.

Press to select the desired function.

Press to adjust or change the function.

2

3

TV/AV

Press to go back to watching TV.

OFF TIMER

Switches the TV off within a preset time which you can choose
from between 0 to 90 minutes in 15 minutes intervals.

OFF

15 30 45

90 75

60

CH COLOUR SET

Colour density varying between broadcast channels can be
adjusted to three levels for each reception channel.

CHILD LOCK

If the Child-Lock function is set ON, picture and sound of the TV/
AV mode being viewed will disappear and a Black screen will appear.

BLUE BACK

You can choose Blue Back display ON or OFF when there is no signal.

ILLUMINATION

Select “ON” to illuminate the ILLUMINATION LIGHT on the front
panel. Otherwise, select “OFF”.

FLICKER REDUCTION

Lets you control any picture movement. Set to ON to activate
motion compensation, to smooth the image and get rid of picture
movement. Set to Off to have no flicker reduction at aIl, occasional
broadcasts may benefit from using this setting.

ON

OFF

3D-COMB

You can choose 3D-COMB function ON or OFF. If the 3D-COMB
function is ON, dot interference or cross colour will be reduced.
Note: Not available in component and RGB input.

PICTURE SHIFT

For use as a screen saver, this function changes the entire picture
position (shift) approximately 2 mm every 15 minutes.

During AV mode, the appearance of the SETUP MENU will differ from that of the TV mode, with the following function adjustments
becoming available.

AUTO

PAL

SECAM

NTSC3.58

NTSC4.43

COLOUR MATRIX

Displays 480p/575p input signals in a natural colour from digital
equipment adapters connected to COMPONENT VIDEO INPUT
(Y, P

B

, P

R

) terminals. Select HD or SD to automatically adjust

colour parameters for HD (high definition) or SD(standard
definition). SD: When the input signal is a normal TV system
(NTSC). HD: When the input signal is a High-Definition system.
Note: This feature is available only with 525p/625p (480p/575p)
signal and not available with 525i/625i(480i/575i) signal.

VCR/GAME

Reproduction of irregular signals, such as certain TV games and
rental video tapes, may be improved.

MENU

OFF TIMER

TELETEXT

SETUP

CH COLOUR SET
CHILD LOCK

FLICKER REDUC.

BLUE BACK

ILLUMINATION

ON
OFF

TOP

ON

OFF

OFF

PICTURE SHIFT
TUNING MENU
OWNER ID

CONVERGENCE

ON

3D-COMB

SETUP

ON

OFF TIMER

SETUP

CH COLOUR SET
CHILD LOCK
BLUE BACK

ILLUMINATION

OFF

ON

OFF

ON

COLOUR SYS

AUTO

VCR/GAME

OFF

COLOUR MATRIX

SETUP

3D-COMB
PICTURE SHIFT
OWNER ID

SD

ON
ON

CONVERGENCE

COLOUR SYSTEM

During AV mode, COLOUR SYSTEM is displayed.
If a clear picture with current colours cannot be obtained when a
Broadcast or AV signal is received, then the colour system will
change as shown.

PAL, SECAM and NTSC 3.58 are different colour signal
broadcast transmission systems applicable to differing countries.
NTSC 4.43 is a trick playback mode used in special VCR to
playback NTSC recorded video tapes through PAL television
equipment.

Advertising