Panasonic TX-47P950A - Manual (Page 5)

5
Before Operating This Set
S-VIDEO VIDEO MONO MONO R L AUDIO MONO PB PR
Y PB PR
Y
AV1
IN AV2 IN AV4 IN MONITOR OUT I COMPONENT I COMPONENT
VHF Aerial
Connecting the Aerial Cable to the RF in Terminal
UHF Aerial
Mixer
75 Ohm
Coaxial Cable
RF in Terminal
Coaxial Aerial Plug
RF in
Terminal
Coaxial aerial plug
75 Ohm Coaxial Cable
To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are
required.If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket
and your set.
Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your particular area
and accessories required.
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the
responsibility of you, the Customer.
Connecting Headphones
Connect headphones as follows.
You can listen to sound from the headphones plugs as shown below.
Screen condition
Single
picture/Teletext
Picture in
Picture
Picture and
Picture
B
A
B A
A
Speaker
Sound
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
A
(Stereo)
Headphones
Monitor
Output
Headphones plug:
When a Headphones plug is inserted into the Headphones socket, all
speakers will be automatically disconnected; only the Headphones will
function.
Use Volume Up “+” or Down “-” button to control volume level.
(3.5mm Plug)
(Optional)
(not supplied)