Pelco DX8100 - Manual (Page 34)

34 C2629M-A (6/07)
5. Enter a unique system ID for your DVR in the System ID field. (System IDs must start with a letter, must be 15 characters or less, and cannot
include spaces or special characters.)
Your DVR’s site name is used to identify your system to clients and other DX8100 servers. Your DVR’s system ID is used to uniquely identify
your system on a local area network (LAN). System IDs are required to prevent possible conflicts with other network devices.
6. Proceed to the steps for setting up DHCP or Static IP addressing in the following sections.
Figure 29. Network Setup Page: Software Configuration