Pelco DX8100 - Manual (Page 88)

88 C2629M-A (6/07)
11. Click Event-Recording Link Settings. The Event-Recording Link Settings page is displayed.
Figure 114. Event-Recording Link Settings Page
12. In the ATM/POS Record Link Settings area, do the following:
a. In the ATM/POS Address drop-down box, select an ATM/POS01 address.
b. In the Enable Record/Live on Source ATM/POS Event area, click a camera to link the camera to the ATM/POS address.
c. Click Apply.
13. Click . The Schedule setup page is displayed.
14. Create an ATM/POS schedule for the camera you linked to the ATM/POS address.
Figure 115. Schedule Setup Page