114 assigning a data format to an atm/pos device – Pelco DX8100 User Manual
Page 87
C2629M-A (6/07)
87
9. In the Device Configuration page, do the following:
a.
Click the Settings tab. The Available ATM/POS Device table is displayed.
b.
In the Device ID column, click the check box to select an ATM/POS device.
c.
Double-click the Data Format cell for the selected ATM/POS device. The Data Format cell drop-down box is displayed.
d.
Click in the Data Format cell to display the available data formats.
e.
Select the data format you want to assign to the ATM/POS device.
f.
Do one of the following:
•
Click Apply to confirm selection and remain in the Device Configuration dialog box.
•
Click OK to confirm selection and return to the Port/Device page.
Figure 113. Assigning a Data Format to An ATM/POS Device
10. Click
. The Linking setup page is displayed.