Pride Mobility Dynamic Controller INFMANU3676 - Manual (Page 11)

Basic Operation Instructions 11
www.pridemobility.com Dynamic Controller
Figure 2. Dynamic Controller
OPERATING THE DYNAMIC CONTROLLER
The Dynamic controller is used to operate your power chair and all of its
components.
The Dynamic controller consists of (see figure 2):
1. joystick
2. keypad
3. off-board charger/programming socket
4. controller connector
5. power module
Joystick Control
The joystick controls the direction and speed of your power chair. When you
move the joystick from the neutral (center) position, the electromagnetic
brakes release and allow your power chair to move. The farther you push the
joystick from its neutral position, the faster your power chair moves. When
you release the joystick and allow it to return to the neutral position, you
engage the electromagnetic brakes. This causes your power chair to decel-
erate and come to a complete stop.
2
3
4
5
1