Philips FWM387/12 - Manual (Page 12)

EN 11
English
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage set on the voltage
selector on the back of the unit.
Before connecting the AC power cord, ensure you
•
have completed all other connections.
Note
The type plate is located on the back of the main unit. •
1
Connect the AC power cable to:
the main unit. •
the wall socket. •
Prepare the remote control
Note
Risk of explosion! Keep batteries away from heat, •
sunshine or fi re. Never discard batteries in fi re.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
If you are not going to use the remote control for a •
long time, remove the batteries.
Do not use old and new or different types of batteries
•
in combination.
Batteries contain chemical substances, so they should
•
be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto »
install - press the PLAY button) is
displayed.
2
Press on the main unit to start
installation.
[AUTO] (auto) is displayed. »
The unit automatically stores radio »
stations with suffi cient signal strength.
When all the available radio stations
»
are stored, the fi rst preset radio station
is broadcast automatically.
3
1
2
FWM387_DFU_ENG_12.indd 章节1:11 FWM387_DFU_ENG_12.indd 章节1:11 1/16/2009 11:06:57 AM 1/16/2009 11:06:57 AM