Philips FWM387/12 - Manual (Page 18)

EN 17
English
7 Listen to radio
Tune to a radio station
1
Press TUN repeatedly to select FM or
MW.
2
Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed. »
The radio tunes to a station with »
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/ repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations.
1
In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
[AUTO] (auto) is displayed. »
All available stations are programmed »
in the order of waveband reception
strength.
The fi rst programmed radio station is
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1
Tune to a radio station. (see ‘Tune to a
radio station’ on page 17 )
2
Press PROG to activate program mode.
[PROG] (program) blinks on the »
display.
3
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confi rm.
The preset number and the frequency »
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store another •
station in its place.
Select a preset radio station
1
In tuner mode, press ALB/PRESET+/- to
select a preset number.
Tip
Position the antenna as far as possible from TV, VCR •
or other radiation source.
For optimal reception, fully extend and adjust the
•
position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1
For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
FWM387_DFU_ENG_12.indd 章节1:17 FWM387_DFU_ENG_12.indd 章节1:17 1/16/2009 11:07:03 AM 1/16/2009 11:07:03 AM