Philips FWM387/12 - Manual (Page 20)

EN 19
English
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc, radio or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly. (see ‘Set clock’ on page 12 )
2
Press POWER to switch to standby
mode.
3
Press and hold TIMER for more than 2
seconds.
A prompt to select the source is »
displayed.
4
Press DISC 1/2/3 , or TUN or USB to
select a source.
5
Press TIMER to confi rm.
The clock digits are displayed and »
begin to blink.
6
Press ALB/PRESET+/- to set the hour.
7
Press / to set the minute.
8
Press TIMER to confi rm.
The timer is set and activated. »
To deactivate or re-activate an alarm timer
1
When the unit is turned on, press TIMER
repeatedly.
If the timer is activated, » is displayed.
If the timer is deactivated, »
disappears.
Note
In MP3 link mode, the alarm timer cannot be set. •
Tip
If disc/USB source is selected and the audio cannot be •
played, tuner is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, » is
displayed.
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated, »
disappears on the display.
Karaoke
You can connect a microphone (not supplied)
and sing along with a music source.
1
Turn MIC LEVEL 1/2 to the minimum
level.
2
Connect a microphone to the MIC 1/2
jack of the unit.
3
Press DISC 1/2/3 , or TUN , or USB , or
MP3-LINK to select the source, and start
play.
4
Sing through the microphone.
To adjust the volume of the source, •
press VOL +/- .
To adjust the volume of the
•
microphone, turn MIC LEVEL 1/2 .
FWM387_DFU_ENG_12.indd 章节1:19 FWM387_DFU_ENG_12.indd 章节1:19 1/16/2009 11:07:05 AM 1/16/2009 11:07:05 AM