Panasonic DMC-FX38 - Manual (Page 110)

VQT1S07
110
Others
• This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
• The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
> Adjust the brightness of the screen. (P20)
• [POWER LCD] is activated. (P21)
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
• Is the flash setting set to [Œ]?
> Change the flash setting. (P37)
• Flash mode is not available when auto bracket (P43) or [BURST] (P64) in [REC] mode menu
has been set.
• The flash is activated twice when red-eye reduction (P37) has been set.
• Has [FLASH BURST] (P49) in scene mode been set?
• [ROTATE DISP.] (P83) is set to [ON].
• You can rotate pictures with the [ROTATE] function. (P83)
The LCD monitor becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
Flash
The flash is not activated.
Flash is activated several times.
Playback
The picture being played back is rotated and displayed in an unexpected
direction.
DMC-FX38GN-VQT1S07_eng.book 110 ページ ２００８年７月７日 月曜日 午後８時４２分