Panasonic DMC-FX38 - Manual (Page 65)

65
VQT1S07
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
·¿n
[OFF]/[ON]
Note
• Refer to P30 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
For details on [REC] mode menu settings, refer to P18.
Using these modes, the pictures can be made sharper or softer, the colours of the pictures
can be turned into sepia colours or other colour effects can be achieved.
Applicable modes:
ñ·n
Note
• When you take pictures in dark places, noise may become visible. To avoid noise, we
recommend setting to [NATURAL].
• You cannot set [COOL] or [WARM] in Intelligent auto mode. Also, you cannot set [NATURAL] or
[VIVID] in motion picture mode.
• Different colour modes can be set in different [REC] modes.
For details on [REC] mode menu settings, refer to P18.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
·¿n
Note
• The stabilizer function may not be effective in the following cases.
) [DIGITAL ZOOM]
H [COLOR MODE]
[STANDARD]: This is the standard setting.
[NATURAL]: The picture becomes softer.
[VIVID]: The picture becomes sharper.
[B/W]: The picture becomes black and white.
[SEPIA]: The picture becomes sepia.
[COOL]: The picture becomes bluish.
[WARM]: The picture becomes reddish.
[STABILIZER]
[OFF]
[AUTO]:
The optimum jitter compensation is selected depending on the condition.
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
DMC-FX38GN-VQT1S07_eng.book 65 ページ ２００８年７月７日 月曜日 午後８時４２分