Compensating the exposure – Panasonic DMC-FX38 User Manual

Page 42

Advertising
background image

VQT1S07

42

Advanced (Recording pictures)

[REC] mode:

·¿n¨

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.

Note

EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by

the aperture value and the shutter speed.

The exposure compensation value appears on the lower left of the screen.

The set exposure value is memorised even if the camera is turned off.

The compensation range of the exposure will be limited depending on the brightness of the

subject.

Under exposed

Properly

exposed

Overexposed

Compensate the exposure
towards positive.

Compensate the exposure
towards negative.

Press 3 [È] until [EXPOSURE] appears,

compensate the exposure with 2/1.

Select [0 EV] to return to the original exposure.

Press [MENU/SET] to finish.

You can also press the shutter button halfway to finish.

1

2

DMC-FX38GN-VQT1S07_eng.book 42 ページ 2008年7月7日 月曜日 午後8時42分

Advertising