Panasonic DMC-FX38 User Manual

Page 48

Advertising
background image

VQT1S07

48

Advanced (Recording pictures)

When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].

If [ON] is selected when the birthday or name has not been registered, the setting screen

appears automatically.

4

Press [MENU/SET] to finish.

To cancel [AGE] and [NAME]
Select the [OFF] setting in step

2

of the “Birthday/Name setting” procedure.

Note

The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled software

on the CD-ROM (supplied).

If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or

name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].

The focus range becomes the same as macro mode. [5 cm (Wide)/1 m (Tele) to ¶]

[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].

If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the

lower left of the screen for about 5 seconds, along with the current date and time.

If the age is not properly displayed, check the clock and birthday settings.

The birthday setting and name setting can be reset with [RESET].

The initial setting for [AF MODE] is [š].

Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P78).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P47.

Note

The initial setting for the AF assist lamp is [OFF].

[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].

The initial setting for [AF MODE] is [

].

The focus range becomes the same as macro mode. [5 cm (Wide)/1 m (Tele) to ¶]

Refer to [BABY1]/[BABY2] for other information about this mode.

Select this when you want to take pictures of sunset view. This allows you to take vivid
pictures of the red colour of the sun.

This mode minimises the jitter of the subjects, and enables you to take pictures of these
subjects in dimly lit rooms. (Select this for high-sensitivity processing. The sensitivity
automatically switches to between [ISO1600] and [ISO6400].)
Picture size and aspect ratio
Press
3/4 to select the picture size and aspect ratio and then

press [MENU/SET] to set.

3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.

í

[PET]

ï

[SUNSET]

9

[HIGH SENS.]

DMC-FX38GN-VQT1S07_eng.book 48 ページ 2008年7月7日 月曜日 午後8時42分

Advertising