Panasonic DMC-FX38 - Manual (Page 96)

VQT1S07
96
Connecting to other equipment
[PLAYBACK] mode: ¸
Playing Back Pictures on a TV Screen
Preparations:
Set the [TV ASPECT]. (P23)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the AV cable B (supplied) to the video input and the audio
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on.
Note
• Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or
the left and right of the pictures.
• Do not use any other AV cables except the supplied one.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it may be blurry.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [VIDEO OUT] in the [SETUP] menu.
Still pictures recorded on an SD Memory Card can be played back on a TV with an SD
Memory Card slot.
Note
• Depending on the TV model, pictures may not be displayed on the full screen.
Playing back pictures using the AV cable (supplied)
Playing back pictures on a TV with an SD Memory Card slot
DC IN
AV
OUT/
DIGIT
AL
COMPONENT
OUT


1
2
3
4
DMC-FX38GN-VQT1S07_eng.book 96 ページ ２００８年７月７日 月曜日 午後８時４２分