Polycom IP 300 - Manual (Page 5)

2
Installing SoundPoint ® IP 300 SIP
This section provides basic installation
instructions and information for obtaining
the best performance with the Sound-
Point
® IP 300 SIP telephone. If you re-
quire additional information or assistance
with your new telephone, please contact
your System Administrator.
The SoundPoint ® IP 300 SIP User Guide
includes regulatory compliance infor-
mation that your System Administrator
should review and can also be found at:
www.polycom.com
Connecting Network and Power Source
AC Power Option
In-Line Power Option
Cisco™Catalyst™ In-Line
Power Switch
IEEE 802.3af compliant
In-Line Power switch
Connect the supplied Network
Cable between the LAN jack on
the telephone and the LAN port on
the wall or hub/switch device port.
Connect the DC plug of the AC
wall adapter into the supplied LAN
cable as shown.
If the telephone is connected to a compat-
ible Ethernet switch that can provide in-line
power, the telephone will use that power
option. Simply plug the supplied Network
cable between the LAN jack on the telephone
and an available Power and Data port on the
In-Line Power switch.