Panasonic DMR-E30 - Manual (Page 11)

11
Connecting and Setting up
First of all, please disconnect AC mains leads of all units which you are going to connect with before connecting and disconnecting
cables.
If you are connecting your unit to a television with [Q Link] ° 1 , follow these steps. (For Continental Europe)
Begin here also if you have a television with [DATA LOGIC] ° 2 , [Easy Link] ° 3 , [Megalogic] ° 4 or [SMARTLINK] ° 5 and a 21-pin Scart socket.
For details, also read your television’s operating instructions.
ªConnect as following steps
1 RF Coaxial cable (supplied)
2 Fully-wired 21-pin Scart cable (not supplied)
3 Aerial lead (not supplied)
4 AC mains leads (supplied)
5 AC mains leads (not supplied)
Sockets
(1) AV1 21-pin Scart socket
(2) Aerial Input socket
(3) Aerial Output socket
(4) Aerial Input socket
(5) 21-pin Scart socket
Hints:
≥Q Link offers a range of convenient functions. For example, downloading of the tuning positions of all available television stations into your
unit’s memory if you connect the unit to your television with a fully wired 21-pin Scart cable (not supplied). Features similar to Q Link have
different names and may not work the same.
° 1 [Q Link] is a registered trademark of Panasonic.
° 2 [DATA LOGIC] is a registered trademark of Metz.
° 3 [Easy Link] is a registered trademark of Philips.
° 4 [Megalogic] is a registered trademark of Grundig.
° 5 [SMARTLINK] is a registered trademark of Sony.
For details, refer to your television’s operating instructions or consult your dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21 pins of one plug on a fully wired 21-pin Scart cable are connected to the
matching pins on the other end of the cable.
(1)
(2)
(3)
(4)
(5)
1
2
3
4
5