Timer recording using s, Timer recording, Using s – Panasonic DMR-E30 User Manual
Page 27: Number to make timer recording, Press [showview] ([g-code]) (2) button, Press the numeric buttons (4) to enter the s, Number, Press [enter] (10)
27
Timer recording
Using S
HOW
V
IEW
* (G-
CODE
) number to make
timer recording
* S
HOW
V
IEW
: for Continental Europe.
G-
CODE
: for Australia, N.Z. and Asia.
G-
CODE
and S
HOW
V
IEW
are different trademarks used to
represent the same easy recording feature. However, for
simplicity, only the term S
HOW
V
IEW
will be used. If you use
G-
CODE
system, follow the same steps listed for the S
HOW
V
IEW
system.
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme’s S
HOW
V
IEW
(G-
CODE
)
number, which can be found in the television sections of
newspapers or in television guides. You can programme up to 16
programmes one month in advance. Programmes for everyday or
every week are counted as one programme.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Ensure that this unit’s clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1
Press [ShowView] ([G-Code])
(2) button.
<S
HOW
V
IEW
>
<G-
CODE
>
2
Press the numeric buttons
(4) to enter the
S
HOW
V
IEW
(G-
CODE
) number.
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
3
Press [ENTER]
(10).
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
≥Check the programme.
To make corrections (page 28).
To programme other recordings, repeat steps 1, 2, and 3.
4
If the programme is correct
Press [ENTER]
(10).
≥The Timer Programme List screen appears.
5
Press [RETURN]
(23).
ªTo put the unit on recording standby
Press [
Á, TIMER] (12).
Ensure “
Á” lights on the unit’s display.
RETURN
No.
0:59 SP
ShowView
Remain
12:53:00 16.7 TUE
--
0
9
RETURN
No.
0:59 SP
G-CODE
Remain
12:53:00 16.7 TUE
--
0
9
Enter ShowView Number by using 0-9 key.
Enter G-CODE Number by using 0-9 key.
RETURN
No.
0:59 SP
ShowView
Remain
12:53:00 16.7 TUE
--
0
9
1 1 1 1 1 1 1 1
RETURN
No.
0:59 SP
G-CODE
Remain
12:53:00 16.7 TUE
--
0
9
1 1 1 1 1 1 1 1
1
1
RETURN
CANCEL
SELECT
2:00
1:00
16/ 7 TUE
Mode
Stop
Start
Name
Date
1:58 SP
TIMER
RECORDING
Remain
12:53:00 16.7 TUE
ENTER
SP
RETURN
SELECT
2:00
1:00
16/ 7 TUE
Mode
Stop
Start
Name
Date
1:58 SP
TIMER
RECORDING
Remain
12:53:00 16.7 TUE
ENTER
SP
Press ENTER to store new programme.
Press ENTER to store new programme.
VPS
PDC
VPS
PDC
OFF
OFF
CANCEL
64 ABC
64 ABC
RETURN
SELECT
SP
OK
1:22
1:19
64 ABC 16/ 7 TUE
01
Mode
Disc
space
Stop
Start
No.
Name
Date
1:58 SP
TIMER
RECORDING
Remain
1:19:00 16.7 TUE
ENTER
New Timer Programme
CANCEL
OFF
VPS
PDC