Panasonic CQ-CB8901U - Manual (Page 18)

CQ-CB8901U
Function Setting
Adjustment to display on the FUNCTION menu
Audio Setting, Function Setting
FUNCTION Menu Display
35 34
Audio Setting
Adjustment to each speaker and an optional subwoofer
CQ-CB8901U
Main volume adjustment
(Setting range: 0 to 40, Default: 18)
q : Up
w : Down
Bass adjustment
(Setting range: -12 dB to +12 dB, 2 dB Step, Default:
Bass 0 dB)
q : Up
w : Down
Treble adjustment
(Setting range: -12 dB to +12 dB, 2 dB Step, Default:
Treble 0 dB)
q : Up
w : Down
Note: Do not activate SQ and Bass/Treble at same time
to avoid causing sound distortion.
Balance adjustment
(Setting range: L15 to R15 and Center, Default: Center)
q : Right enhanced
w : Left enhanced
Fader adjustment
(Setting range: R15 to F15 and Center, Default: Center)
q : Front enhanced
w : Rear enhanced
Subwoofer level adjustment
(Setting range : mute (- ∞),-6 dB to +6 dB, 2 dB Step,
Default: 0 dB)
q : Up
w : Down
Subwoofer Low Pass Filter
(Setting range: 80 Hz, 120 Hz, 160 Hz, Default: 80 Hz)
q : Up
w : Down
High Pass Filter
(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz,
Default: Filter OFF)
q : Up
w : Down
SQ preset change
(Adjustable frequency: 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz),
Setting range: –12 dB to +12 dB, 2 dB Step) (
a page 19)
q : Up
w : Down
[ [ ] : Higher frequency
[ ] ] : Lower frequency
Subwoofer output range
Other speakers output ranges
AUDIO Menu Display
1
Press [VOLUME]
(SEL: Select) to
display the
AUDIO menu
display.
2
Press [VOLUME] (SEL: Select) to select
a mode to be
adjusted.
3
Turn [VOLUME]
clockwise or
counterclockwise
to adjust.
Note: If no operation takes place for more than 10 sec-
onds in the audio menu (2 sec. in Main volume adjust-
ment), the display returns to the regular mode.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [ ] ] or [ [ ] to display the FUNC-
TION menu.
3
Press [ } ] or [ { ] to select a function to
be adjusted.
4
Press [BAND]
(SET) to adjust.
5
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
MUTE KEY
Setting [MUTE] buttons’ functions
: Volume off (Default)
: Volume down by 10 steps
: Volume down by 5 steps
SECURITY
Setting the security function ( a page 13)
: ON (Default)
: OFF
CQ-CB8901U
CQ-CB8901U