Panasonic CQ-CB8901U - Manual (Page 28)

55 CQ-CB8901U
Specifications
Installation, Specifications
Notes:
¡
Specifications and design are subject to modification without notice due to improvements.
¡ Some figures and illustrations in this manual may be different from your product.
General
Sampling Frequency 8 times oversampling
DA Converter 4 DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor laser
Wavelength 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion 0.01 % (1 kHz)
Wow and Flutter Below measurable limits
Channel Separation 86 dB
FM FM (HD Radio)
Frequency Range 87.9 MHz - 107.9 MHz Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 12.2 dBf. (1.12 µV, 75 Ω) Usable Sensitivity – 88 dBm (BER<1.0X10 -5 )
50 dB quieting Sensitivity 15.2 dBf. (1.59 µV, 75 Ω) Signal to noise ratio 79 dB
Frequency Response 30 Hz - 15 kHz ( ±3 dB) Stereo Separation 76 dB
Alternate channel selectivity 75 dB Total harmonic distortion 0.08 % (1 kHz)
Stereo Separation 40 dB (at 1 kHz)
Image response ratio 75 dB
IF response ratio 100 dB
Signal to noise ratio 62 dB
AM AM (HD Radio)
Frequency Range 530 kHz - 1 710 kHz Frequency Range 530 kHz - 1 710 kHz
Usable Sensitivity 25 dB/µV (S/N 20 dB) Usable Sensitivity 21 dB/µV (BER<1.0X10 -5 )
Signal to noise ratio 77 dB
Stereo Separation 74 dB
Total harmonic distortion 0.08 % (1 kHz)
CD Player
Radio
Power Supply DC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground
Tone Controls (Bass/Treble) Bass; ±12 dB at 62 Hz, Treble; ±12 dB at 16 kHz
Equalizer Center Frequency 60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz)
Variable Range of Equalizer -12 dB to 12 dB (2 dB step)
Current Consumption Less than 2.2 A (CD mode, 0.5 W 4-Speaker)
Maximum Power Output 50 W x 4 (at 1 kHz)
Speaker Impedance 4 - 8 Ω
Pre-amp output voltage 5 V
Subwoofer-output voltage 5 V
Pre-amp output impedance 60 Ω
Subwoofer-output impedance 60 Ω
Dimensions (Main Unit) 178(W) x 50(H) x 155(D) mm {7 ” x 1 15 / 16 ”x 6 1 / 8 ”}
Weight (Main Unit) 1.7 kg {3 lbs. 12 oz}
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4
Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
78 dBA (reference: 1 W into 4
Ω)
54
Installation
CQ-CB8901U
q
Remove the face plate.
Cautions:
¡ Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
¡ If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
w
Remove the trim plate.
e
Lock release
q Insert the lock cancel plate until you hear a
click.
w Pull the main unit.
r
Pull out the unit with both hands.
Insert the tab
end in the
outer groove.
“Click”
To
Remove the Unit
e
w
q
q
w
q
w