Panasonic SV-P20U - Manual (Page 12)

12
Inserting an SD Memory Card/
MultiMediaCard
1
Slide the Memory Card Door 1, and flip it
to open.
2
Hold the Memory Card placing the cut off
corner
2 at the front with the label facing
up, and then insert it fully into the
Memory Card Slot horizontally.
≥When inserted correctly, a clicking noise will be
heard.
3
Close the Memory Card Door 1.
≥After inserting the Memory Card, reverse the
procedure in step 1 to close the Memory Card
Door.
≥The actual time to read all the images from the
Memory Card will vary, depending on the number
and size of the photos.
≥While the [CARD ACCESS] sign is being displayed
in red, never take the card out or turn the power off.
≥If images cannot be recognized by this printer, “t” is
displayed on the index screen.
Turning the Power ON
1
Install the battery or plug in the AC
adaptor ( l l l l 8) and hold down the [ ]
button for about 2 seconds.
≥The [ON] Lamp is turned on.
≥The LCD monitor is turned on 2 seconds after
turning on the [ON] Lamp.
≥The [CARD ACCESS] sign is displayed in red
while the images in the Memory Card are being
read.
≥If no operation is performed with the printer for
about 10 minutes (about 5 minutes when the
Memory Card inserted into the Printer contains
no images) when using the battery, it
automatically turns off the power. (
l l l l 44)
1
2
1
Н
1
2,3
1