Panasonic SV-P20U - Manual (Page 44)

44
Others
Precautions
To ensure high quality, precise printing,
always observe the following points.
Failure to observe these points will not
only result in poor quality prints, but also
paper jams, malfunctions and breakdowns
of the SD Mobile Printer.
ª Ink Cassette/Paper Set Notes
≥Do not store the Ink Cassettes or paper
in high or low temperatures, high
humidity, or direct sunlight. Doing so
could result in a deterioration of printing
quality. They may also become
unusable.
≥Do not reuse printed paper or Ink
Cassettes that have already been
consumed.
≥Do not open the Ink Cassette/Paper Set
package immediately. Wait until it has
reached the surrounding temperature
before using it. If the Ink Cassette/Paper
Set has been stored at a low
temperature, condensation could form
when brought into a warmer room.
≥If the Ink Cassette/Paper Set is defective
due to a manufacturing error on the part
of Panasonic, we will replace the Ink
Cassette/Paper Set with an equivalent
Ink Cassette/Paper Set. Panasonic does
not bear any responsibility beyond
replacing the product.
≥Do not subject the Ink Cassette or paper
to a rapid temperature change.
ª Ink Cassette Notes
≥The Ink Cassette is softened at about
131 degrees F/55 degrees C or higher
and will be hardened when the
temperature is lowered. Under similar
severe conditions the Ink Cassette
cannot be used. Do not place the Ink
Cassette or the Printer fitted with the Ink
Cassette in a location subject to high
temperatures.
≥Do not dispose of the protection sheet
attached to the paper until the last paper
has been consumed.
≥The ink cassette is made of plastic and
metal, and printing paper is made of
resin. When disposing of it, observe the
applicable rules in your country or
region.
ª Paper Notes
≥Dust and humidity damage the paper.
Return remaining paper to its original
bag, and store it flat.
ª Before Printing
≥Make sure the plug is properly inserted
when using the printer.
≥Do not place the printer on unsteady,
inclined, or other unstable surfaces.
ª During Printing
≥Do not forcibly pull out the Ink Cassette
or paper, shake the printer, or add more
paper while printing is in progress.
≥When the ambient temperature or that
within the SD Mobile Printer is low, the
SD Mobile Printer feeds the paper and
stops operating to warm it for about 4 -
5 minutes. Particularly under a low-
temperature environment, printing one
sheet may take 10 minutes or more. In
this case, the printed image may have
faint colors.
≥Do not pull the paper out forcibly, and
never add any oscillation or vibration to
the device during printing.
≥Do not feed two or more sheets of paper
at a time.
≥If no operation is performed with the
printer for a period when using the
battery, it automatically turns off the
power. (Auto-power-save function). The
Auto-power-save function is activated
after a lapse of the following times.