Panasonic SV-P20U - Manual (Page 50)

50
ª Maintenance Notes
≥Do not use solvents such as Benzene
and paint thinner to wipe the printer
since they can damage the surface of
the printer and cause the surface to peel.
To clean the surface, wipe up any dust
with a soft, dry cloth. If the printer is
particularly dirty, soak the cloth in mild
kitchen detergent (neutral) diluted with
water and wring out thoroughly. Then,
wipe off the dust with the cloth and wipe
again with a dry cloth. When using a
synthetic cloth, follow the precautions in
the cloth’s usage instructions.
≥When you use this printer on a beach or
similar place, do not let sand, fine dust,
or seawater get into the printer.