Panasonic SV-P20U - Manual (Page 49)

49
≥You can use a Head Cleaner about 150
times.
≥Put the Head Cleaner into its bag after
using it.
ª Notes on Handling the SD
Mobile Printer
≥When spraying or using insecticides or
other volatile solvents in the vicinity of
the printer, be careful not to allow any to
come into contact with the printer. If such
solvents come into contact with the
printer, they can damage the outer case
and cause the surface to peel. Do not
allow rubber or plastic products to be in
contact with the printer for extended
periods of time.
≥When not using the printer for extended
periods of time, turn off the power and
disconnect the Power Cable from the
outlet to conserve energy. (A minute
amount of current is consumed even
when the printer power is off.)
≥When transporting this printer, during a
move for example, pack the printer back
into the supplied Carrying Case. Do not
drop or impact the printer in any way. It
may cause damage to the printer.
≥If the printer emits smoke, becomes
unusually hot, or gives off an unusual
smell, turn off the printer and unplug it.
≥If water or other foreign matter gets
inside the printer, turn off the printer and
unplug it.
≥If the surface of the printer becomes
broken or cracked, turn off the printer
and unplug it.
≥If the main lead is damaged (such as the
core wires being exposed), turn off the
printer and unplug it.
≥Do not use the printer in any way which
overloads the electric outlet or wiring.
≥Do not damage the main lead or plug.
≥Remove dust or other foreign matter
adhering to the power plug.
≥Do not drop or insert metal or flammable
objects inside the printer.
≥Do not splash or wet the printer.
≥Do not disassemble or remodel the
printer.
≥Do not touch the metal parts on the
printer or the plug during a thunderstorm.
≥Do not unplug with wet hands.
≥Do not place the printer in locations with
smoke, steam, high humidity, large
amounts of dust, or severe vibrations.
≥Do not install the printer in such a way
that the power Cable is forcibly bent.
≥Do not place heavy objects on the
printer.
≥Do not move the printer with the power
Cable plugged in.
≥Do not unplug by pulling on the power
Cable.
≥Unplug the main lead as a safety
measure when cleaning the printer or
when the printer will not be used for a
long period of time.
≥Do not touch any internal components
other than those specified.
≥A minute amount of current is consumed
even when the printer power is off.
≥Install the printer away from other
devices that generate magnetic fields.
≥Electromagnetic waves produced in this
printer and in televisions, video games,
and other devices can cause mutual
interference, disrupting both the display
on the television screen and the printed
picture.