Panasonic KXTG4321 - Manual (Page 15)

Making/Answering Calls
15 For assistance, please visit http://www.panasonic.com/help
Making calls
1 Lift the handset and dial the phone
number.
L
To correct a digit, press {Clear}.
2 Press {C} or {Call}.
3 When you finish talking, press
{
OFF} or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number, and press
{s}
.
L
Speak alternately with the other
party.
2 When you finish talking, press
{
OFF}.
Note:
L
For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}
.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
{ REDIAL}
2
{V} /{^}: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
{
REDIAL}
2
{V}
/{^}: Select the desired phone
number.
3
{ Erase} i {Yes} i {OFF}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 19).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1
{ 9} i {PAUSE}
2 Dial the phone number. i {C}
Note:
L
A 3.5 second pause is inserted each
time {PAUSE} is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press {C} or
{s}
when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{
9}, {*}, or {#}. (Any key
answer feature)
2 When you finish talking, press
{
OFF} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 22.
TG43xx_OI.book Page 15 Tuesday, December 11, 2007 2:04 PM