Intercom/locator, Intercom, Transferring calls, conference calls – Panasonic KXTG4321 User Manual
Page 38: Intercom transferring calls, conference calls . 38
Intercom/Locator
38
For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
– between handsets.
– between the handset and base unit.
Note:
L
If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press {OFF}, then press {C}.
L
When paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1
{
INTERCOM}
2
{V}
/{^}: Select the desired unit. i
{
Select}
L
To stop paging, press {OFF}.
3
When you finish talking, press
{
OFF}.
1
{
INTERCOM}
L
All registered handsets beep.
L
To stop paging, press
{
INTERCOM}.
2
When you finish talking, press
{
INTERCOM}.
Answering an intercom call
1
Press {C} to answer the page.
2
When you finish talking, press
{
OFF}.
1
Press {INTERCOM} to answer the
page.
2
When you finish talking, press
{
INTERCOM}.
Note:
L
When the ringer volume for outside
calls is set to off (page 16, 23), the
handset and/or base unit rings at a
low level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between 2 handsets. 2 handsets can
have a conference call with an outside
party.
1
During an outside call, press
{
INTERCOM} to put the call on hold.
2
{V}
/{^}: Select the desired unit. i
{
Transfer}
3
Wait for the paged party to answer.
L
If the paged party does not
answer, press {C} to return to
the outside call.
4
To complete the transfer:
Press {OFF}.
L
The outside call is being routed to
the destination unit.
To establish a conference call:
Press {Conf}.
Handset
Base unit
Handset
Base unit
TG43xx_OI.book Page 38 Tuesday, December 11, 2007 2:04 PM