Panasonic KXTG4321 User Manual

Page 46

Advertising
background image

Useful Information

46

For assistance, please visit http://www.panasonic.com/help

Answering system

The 2nd caller’s information is
not displayed during an outside
call.

L

In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).

Problem

Cause/solution

The unit does not record new
messages.

L

The answering system is turned off. Turn it on
(page 30).

L

The message memory is full. Erase
unnecessary messages (page 31).

L

The recording time is set to “Greeting
only”
. Change the setting (page 35).

L

If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 34).

I cannot operate the answering
system.

L

Someone is using the unit. Wait for the other
user to finish.

L

A caller is leaving a message. Wait for the
caller to finish.

L

The handset is too far from the base unit.
Move closer.

I cannot operate the answering
system remotely.

L

You are entering the wrong remote access
code. If you forgot the remote access code,
store a new remote access code (page 33).

L

Press each key firmly.

L

The answering system is turned off. Turn it on
(page 34).

L

You are using a rotary/pulse telephone. Try
again using a touch-tone phone.

Problem

Cause/solution

TG43xx_OI.book Page 46 Tuesday, December 11, 2007 2:04 PM

Advertising