Panasonic AW-DU600P - Manual (Page 12)

12
Connections
0 1 2 3 4 5 6 7 8 9
1 :
P r e s s S t a r t
Making a call
Make a call from the AW-DU600 of the transmitting
system.
2.
Use the number keys on this adapter to enter the
desired number.
The telephone number entered appears on the top
section of the LCD panel.
<Note>
While the telephone line is being connected, none of the
operating keys on the adapters will function except for
the STOP key on the transmitting side.
1.
Turn on the power to all units.
3.
After entering the telephone number, press the
START key.
When the connection is initiated, “Calling” appears on
the LCD panel.
When the connection is established, “Connect” appears
on the LCD panel and control of the pan-tilt head
system from the control panel is possible.
<Note>
The message appearing on the LCD panel may differ,
depending on the modem used.
4.
Control the pan-tilt head system from the control
panel.
When an AW-RP605 is being used as the control panel,
set the OPERATE switch to ON to control the pan-tilt
head system.
<Note>
O When an AW-RP505 or AW-RP605 is being used as
the control panel, it is possible to switch the receiving
pan-tilt head system using the CONTROL button on
the control panel.
O If the OPERATE switch on the AJ-RP605 is set to ON
before the telephone line is connected, “NO
CONNECT” is displayed on the LCD panel.
5.
After control of the pan-tilt head is completed, press the
STOP key.
“Hang Up” appears on the LCD display and the
telephone line is cut.
Once the line is cut, “Press Start” appears on the LCD
panel.
When ON has been selected for the “Menu-7 Pw-Off”
setting, the power to the pan-tilt head will turn off at the
same time as the telephone line is cut. When OFF has
been selected for the “Menu-7 Pw-Off” setting, the
power to the pan-tilt head will remain on when the
telephone line is cut.
<Note>
If the POWER switch or OPERATE switch on the
control panel is set to OFF before the telephone line is
cut, the power to the pan-tilt head will turn off regardless
of the “Menu-7 Pw-Off” setting.
If the wrong number is entered by mistake, press the
DELETE key (
i ) to delete 1 digit at a time,
starting from the number entered last. Press the CLEAR
key (
i ) to delete the whole number at
once.
START #
0 #
!Telephone number entered