Panasonic AW-DU600P - Manual (Page 19)

19
Attaching the rack mounting adapters
Changing the position of the rear panel
To install the adapter in a rack, use the rack mounting adapters and four of the mounting screws (M4) supplied.
1. Remove the three screws from the bottom panel and
remove the blank panel.
2. Remove the three screws from the rear panel and
remove the rear panel.
3. Use the three screws to firmly secure the rear panel
where the blank panel was removed from the bottom
panel.
Take care not to catch the internal wiring when reattaching the panels.
RS-232C CONTROL OUT
P5 P4 P3 P2 P1
P5 P4 P3 P2 PAN/TILT
CONTROL IN CAMERA CONTROL IN
GND
DC 12V IN
TO RCB/PC
A
B
P1
TO CAMERA & PAN/TILT HEAD TO MODEM
RS-422 CONTROL OUT
TO CAMERA & PAN/TILT HEAD TO CONTROL PANEL
OUT PUT
IN PUT
4. Use the three screws to firmly secure the blank panel
where the rear panel was removed.
RS-232C CONTROL OUT
P5 P4 P3 P2 P1
P5 P4 P3 P2 PAN/TILT
CONTROL IN
CAMERA
CONTROL IN
GND
DC 12V IN
TO RCB/PC
A
B
P1
TO CAMERA & PAN/TILT HEAD TO MODEM
RS-422 CONTROL OUT
TO CAMERA & PAN/TILT HEAD TO CONTROL PANEL
OUT PUT
IN PUT
Screws
Screws
Screws
Screws
Blank panel
Blank panel
Rack mounting adapter
Screw