Panasonic BB-HCM331 - Manual (Page 31)

Installation/Troubleshooting
31
1.11 Confirming the Camera Image
1. Start up the web browser on your PC.
2. Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
•
When port number is 80 (default), you do not need to enter port number.
See page 53 of the Operating Instructions on the Setup CD-ROM for
details about port number.
• For IPv6 connection, see page 22 and page 23 of the Operating
Instructions on the Setup CD-ROM and prepare the requirements. Enter
the "http://(IPv6-registered URL):Port Number" on the address bar.
• If the camera image is not displayed, see page 48.
3. The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page, authentication window will not be displayed.
4. Click the following tabs to display each page.
A To Single Camera page
(page 24 of Operating Instructions)
B To Multi-Camera page
(page 41 of Operating Instructions)
C To Buffered Image page
(page 43 of Operating Instructions)
D To Setup page
(page 48 of Operating Instructions)
E To Maintenance page
(page 145 of Operating Instructions)
F To Support page
(page 155 of Operating Instructions)
G To log in to the camera
(page 91 of Operating Instructions)
A B C D E F G
Select a language.
Displays IPv4, IPv6
or IPsec connection.
Version Number