1 before using, 1 important safety instructions, 1before using – Panasonic BB-HCM331 User Manual
Page 7
Installation/Troubleshooting
7
1
Before Using
1.1
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, or personal injury.
1.
Read and understand all instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
After taking away the sand or the dust on the lens cover, wipe the lens cover
with a dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
7.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other devices (including amplifiers) that produce heat.
8.
Protect the AC adaptor cord and AC cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where they exit
from the unit.
9.
The AC cord is used as the main disconnect device, ensure that the socket-
outlet is located/installed near the equipment and is easily accessible.
10.
Only use attachments/accessories such as stand specified by the
manufacturer.
11.
Do not touch the unit or the AC adaptor cord and AC cord during lightning storms.
12.
Unplug the unit when unused for long periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as the AC adaptor, AC cord or
plug is damaged, the unit does not operate normally, or has been dropped.
14.
Prolonged exposure to direct sunlight or halogen light may damage CCD
sensor.
15.
The attached AC adaptor and AC cord is intended for indoor use only. Both AC
adaptor and AC cord must be waterproofed for outside use.
16.
Keep the SD memory card (customer-provided) out of reach of children to
prevent swallowing.
17.
Unplug this unit from power outlets if it emits smoke, an abnormal smell or
makes unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped and contact an authorized service center.
SAVE THESE INSTRUCTIONS