Panasonic DMC-F2 - Manual (Page 100)

Connecting to other equipment
- 100 -
SELECT SET
USB MODE
PLEASE SELECT
THE USB MODE
2 Press e/r to select [PictBridge(PTP)], and then
press [MENU/SET].
Note
• We recommend placing a soft cloth under this unit to prevent scratching.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB
connection cable.
• You cannot switch between the built-in memory and the card while the camera is
connected to the printer. Disconnect the USB connection cable, insert (or remove) the
card and then connect the USB connection cable to the printer again.
Selecting a single picture and printing it
PLEASE SELECT
THE PICTURE TO PRINT
SELECT PRINT
MULTI PRINT
PictBridge
100-0001
1/19
10 M
1 Press w/q to select the picture and then press
[MENU/SET].
• A message displays for about 2 seconds.
CANCEL
SINGLE SELECT
PRINT WITH DATE
NUM.OF PRINTS
PAGE LAYOUT
PAPER SIZE
PRINT START
1
OFF
SELECT SET
2 Press e to select [PRINT START] and then press
[MENU/SET].
• Refer to P 102 for the items which can be set before starting
to print the pictures.
• Press [MENU/SET] to cancel printing halfway.
• Disconnect the USB connection cable after printing.