Panasonic DMC-F2 - Manual (Page 85)

Advanced-Viewing
-  -
y [TITLE EDIT]
You can add text (comments) to pictures. After text has been registered, it can be included
in prints using [TEXT STAMP] (P 87 ). (Only alphabetical characters and symbols can be
entered.)
1 Select [TITLE EDIT] on the [PLAYBACK] menu. (P 21 )
2 Press e/r to select [SINGLE] or [MULTI] and then
press [MENU/SET].
[SINGLE] [MULTI]
Press w/q to
select the picture.
Press e/r/w/q to
select the pictures.
3 Select the picture, and then
press [MENU/SET] to set.
• [u] is displayed for pictures that
have already been recorded with
text in [BABY1]/[BABY2] or [PET]
name settings in Scene Mode,
[TRAVEL DATE] location setting or
[TITLE EDIT].
For [MULTI] setting
Press [DISPLAY] to set (repeat), and then press [MENU/SET].
• The setting is canceled when [DISPLAY] is pressed again.
4 Press e/r/w/q to select text and press [MENU/
SET] to register.
• Press [DISPLAY] to switch text between [A] (capitals), [a]
(small case) and [&/1] (special characters and numbers).
• The cursor at the entry position can be moved to the left
with [6], and to the right with [7].
• To enter a blank, move the cursor to [SPACE] and press [MENU/SET]. To delete
an entered character, move the cursor to [DELETE], and press [MENU/SET].
• To stop editing during text entry, press [4].
• A maximum of 30 characters can be entered.
5 Press e/r/w/q to move the cursor to [EXIT] and then press [MENU/
SET] to finish text input.
6 Press [4] to return to the menu screen  .
 The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.